Parts

Exchange Components

• 

  3 x R2900 G Wheel Groups

  New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

• 

  2 x R1700G Wheel Ends

  • All new brake discs, plates and springs.
  • Ring gears, planetary gears and sun gear new.
• 

  R2900G Differential

  Bevel gear set new.

• 

  R2900G Tilt Cylinder

  Rod is done in HVOF

• 

  R2900G Transmission

  • All new clutch discs through out.
  • Westrac dynoed.
• 

  2 x R1700 II Wheel Ends

  • New ring gears, planetary gears and sun gears
  • New discs, plates and springs.
• 

  R2900 and R2900G Torque Convertor

• 

  R1700 II and R1700G Torque Convertor

• 

  2 x R1700G Steer Cylinders

  New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

• 

  2 x R2900 and R2900G Steer Cylinders

  New brake discs, plates, springs, planetary gears, ring gear and sun gears in all wheel groups.

• 

  Full Set of 966F Cylinders

• 

  R1700G Slip Diff

• 

  R2800 Torque Convertor and Up drive Ride Control Accumulators

• 

  769C Suspension leg and Steer Cyl

* R1700G, R2900G and R1700 II exchange complete axles can also be made up for exchange.

We are currently dismantling a R1700G. All parts and components are for sale. Boyes Mechanical will also be doing the majority of the components up for exchange.

New Parts

We carry a large array of new Cat parts from over the past 10 years. A long with this we also have various Komatsu, Toro, Volvo, Bell, Getman and Jacon parts.

Cat parts consist off:

• Various engine parts
• Transmission gears, housings, shafts, plates and discs
• Differential gears and thrust plates
• Wheel group gears
• Brakes discs, seals, plates etc
• Torque convertor components
• Bushes, pins cups and cones
• Undercarriage hardware, pins, covers, pads, caps etc
• Centre hitch parts

• Cab and component mounts
• Bucket, control group pins and bushes
• Panels and brackets for underground equip
• Steering components and seal kits
• Hydraulic valves and seal kits
• Drive shaft universals and yokes
• Cab parts, hand controllers, pedals etc to
  suite underground equipment
• Electrical switches, various underground machine
  harness's, senders, etc

Machined Parts

To allow quick turn around of our component rebuilds we have a lot of parts that commonly require machining, when carrying out rebuilds. The main components are brake housings, brake pistons and diff centres for AD55, 775E, R1700G, R1700II, R2900G and R1300. Other parts machined and ready to go are trunnions, pinion housings, rear supports, yokes and transmissions planetary housings.

2/H Parts and Components

• Chassis frames are for R2900's and R1700 II
• Numerous component housings.
• Front control groups included
• Spare wheel ends to suite boggers
• 1 x R2900 front frame fully machined, with control valve

• Complete engines and spare parts
• accumulator and ride control all overhauled.
• 966F axles, R2800 and R2900G
• R2900G and 966F transmissions
• Various torque convertors

Large array of Cat component parts

Machine Hire

Currently have an IT28F and a Cat 216 bobcat for short or long term hire. These machines are in A1 condition. Have only been for use in our premises for our own purposes but due to requests we are looking to hire them out to our clients. If a client requires a particular set up on a machine, we would be only to happy to do so. Boyes Mechanical is also willing to purchase a machine to assist in our clients requirements and with the choice to hire and buy.

Please call for any requests or expressions of interest on any of the above, any time.